CANDURA® 35
Near Vertical, Plantable, Stacking Wall System

CANDURA® 35 is a near vertical, plantable, segmental retaining wall system. CANDURA® 35 is designed for use in areas where site geometry may preclude the use of a battered wall system but where an aesthetically pleasing wall is an absolute necessity. CANDURA® 35 is ideal when used as a low landscaping wall defining areas of a patio and for increasing seating area. CANDURA® 35 is extremely versatile and can be configured to incorporate plantability features or it can be constructed without vegetation. Like VERDURA®, CANDURA® 35 incorporates a positive geosynthetic-block connection system as well as high form capacity necessary for proper wall construction. The three part product system (CANDURA® 35 block, CANDURA® 35 capstone, and CANDURA® 35 corner stone) enables it to negotiate both radius’ and 90 degree corners and enables construction of stairs and seating surface at the wall crest. CANDURA® 35 and its components are manufactured in the USA.

	Nominal Dimensions 8 in x 18 in x 12 in Face Area of Each Block 1 sq ft Wall Batter (set back) 2.5 to 35 degrees from vertical Unit Block Weight 70 lbs Compressive Strength 4000 psi Blocks Per Pallet 30 Wall Area Covered By Pallet 30 sq ft
Block (with stakes)
	Nominal Dimensions 2.5 in x 18 in x 16 in Unit Block Weight 49 lbs Blocks Per Pallet 48
Capstone
	Nominal Dimensions 8 in x 18 in x 9 in Unit Block Weight 64 lbs Blocks Per Pallet 40
Corner